mud treatment

MUD Treatment System

Shale shakers are components of drilling equipment used in many industries, such as coal cleaning, mining, oil and gas drilling. They are considered to be the first phase of a solids control system ...

Mud Gas Separator of Mud Treatment System

Mud Gas Separator is commonly called a gas-buster or poor boy degasser. It captures and separates large volume of free gas within the drilling fluid....

Decanter Centrifuge of Mud Treatment System

6. Decanter Centrifuge      Decanter Centrifuge separate the suspending fluids using  the principle of centrifugal action, the suspending fluids is pushed into the rotor drum through the inlet pipe and the fluid hole of the spiral feeder. Under the influence of centrifugal force, solid phase particles are pushed to the internal wall of the drum, then to the nud export of the small end of the drum and excreted. But the fluids is excreted from the overflow hole of the large end. Such cycle is in order to achieve the purpose of continuous separation.High speed decanting centrifuge are effective for separation.   Drive Principle Mud passing through the Desilter contained in separating fine Cutting Drive Effect Mud is included in order to reuse as reproducing Barite Component Bowl, Co...

Desilter of Mud Treatment System

Desilter : A hydrocyclone much like a desander except that its design incorporates a greater number of smaller cones...

Desander of Mud Treatment System

4. Desander    Desander and desilter are solid control equipment with a set of hydrocyclones that separate sand and silt from the drilling fluids in drilling rigs. Desanders are installed on top of the mud tank following the shale shaker and the degasser, but before the desilter. Desander removes the abrasive solids from the drilling fluids which cannot be removed by shakers. Normally the solids diameter for desander to be separated would be 45~74μm, and 15~44μm for desilter.   Drive Principle Included in the Mud Desilter fine passing Cutting the Cyclone, Fine Screen removed through Drive Effect Weighted Mud Barite without loss effectively removed from the Solid Component Shaker, Cone, Mesh, Pipe etc. Specification table of Desander (Woomin technology) Model WMDESAN500 WMDESAN1000 WMD...

Shale Shaker of Mud Treatment System

   1. Shale Shaker Shale shakers are components of drilling equipment used in many industries, such as coal cleaning, mining, oil and gas drilling. They are considered to be the first phase of a solids control system on a drilling rig, they are used to remove large solids also called cuttings from the drilling fluid, more commonly called “Mud” due to its similar appearance. Drilling fluids are integral to the drilling process and, among other functions, serve to lubricate and cool the drill bit as well as convey the drilled cuttings away from the bore hole. These fluids are a mixture of various chemicals in a water or oil based solution and can be very expensive to make. For both environmental reasons and to reduce the cost of drilling operations, drilling fluid losses are minimized by str...

Lost Password

Register

Skip to toolbar