Latest Activity

LNG featured news

Hyundai Heavy Industries Group Wins USD 240 Million Order for the World’s First LNG-fueled Aframax Tankers

Hyundai Samho Heavy Industries (HSHI), Hyundai Heavy Industries’ shipbuilding affiliate, announced today that it recently won an order to build four 114,000 DWT...

SEA\LNG, SGMF to Promote LNG as Marine Fuel

The multi-sector industry coalition SEA\LNG signed a memorandum of understanding (MoU) with the Society for Gas as a Marine Fuel (SGMF) in an effort to accelera...

Exclusive

What is post delivery work ?

KHAN has been provide post delivery work on offshore plant and you will know the process of post delivery work from this post. Furthermore, KHAN has been provid...

What is SaVo System ?

Safety & Voice System (SaVo Systme) is an Automatic Emergency Call System at unconscious state & Easy Communication System.

Minimum Required Documentation for Supplying Materials

Building plant requires a lot of paper works such as QCP, ITP, Manufacturing Procedure, Sub-vendor list, Mechanical Book, Installation Manual, Quality Assurance...

Titanium Tube Crack

The crack on the titanium tubes which is the surface of condenser, was found during the commissioning. There are a few causes of tube damage which may occur by ...

Corrosion, and Painting Failure

The purpose of painting is to prevent corrosion from moisture, acid gas, or other factors. So, we apply varnish coating, galvanizing, or anti-corrosion coating ...

Pitting on the Surface of HIC(Hydrogen Induced Crack) Plates

Pitting or Pitting Corrosion is well known quality failure which we can find on the surface of steel products. Every steel products have stabilized surface whic...

Cause of Rust on the Surface Painted

Steel products easily get rusted unless it’s stainless steel. There is many efforts to prevent rusting for example painting, varnishing, or rust transform...

LNG FPSO MPDS (Multi-Purpose Dynamic Simulator) PROJECT (4) – Fractionation Unit & Fuel Gas Unit

The Fractionation Unit (F-5000) is to process the heavy hydrocarbons separated from the sweat and dry feed gas in the scrubber column (L-C-4001) of the liquefac...

LNG FPSO MPDS (Multi-Purpose Dynamic Simulator) PROJECT (3) – Liquefaction Unit

Offshore liquefaction facilities have different design criteria and process requirement from the on-shore liquefaction facilities. Thermodynamic efficiency is t...

LNG FPSO MPDS (Multi-Purpose Dynamic Simulator) PROJECT (2) – Dehydration Unit & Mercury Removal Unit

The Dehydration Unit (D-2000) is to remove water from the natural gas feed prior to the pre-cooling of the gas. Three fixed molecular sieve beds operating in p...

LNG FPSO MPDS (Multi-Purpose Dynamic Simulator) PROJECT (1) – General & Acid Gas Removal Unit

The process is designed for the MPDS (Multi-Purpose Dynamic Simulator) development of the LNG (Liquefied Natural Gas) FPSO (Floating Production Storage and Offl...

Pressure Vessel Hydro Test Failure

Hydro test is mandatory for pressure vessels and we see often test failure in many cases. This time we found the failure during the test due to heavy load and w...

Lost Password

Register

Skip to toolbar